Full-Service Roofing | Maben, MS
Our service list isn't complicated: we fix roofs, replace roofs, and install new ones. We also handle gutters, metal systems, and flat roofing for commercial buildings across Maben.
Roof Replacement
The average roof replacement in Maben takes one day for a standard residential home. Larger or steeper roofs might take two. Either way, we don't leave a house uncovered overnight. If we tear it off, we cover it before we leave. No exceptions.
Get a Free Quote →
Roof Repair
Most roof leaks in Maben come from one of five places: pipe boots, step flashing at walls, valley flashing, damaged shingles, or failed seals around skylights. We find the actual source. Not just the drip point in your ceiling. And fix it right. Water travels along rafters and sheathing before it drips, so the leak location and the damage location are often 10 feet apart.
Get a Free Quote →
Storm Damage Repair
Storm damage is time-sensitive. Most insurance policies in Mississippi require claims within 12 months. We do a free inspection, document every damaged area with photos and measurements, and help you file the claim. If the adjuster approves it, we handle the repairs at the insurance-approved price.
Get a Free Quote →
New Roof Installation
We handle new construction from permits through final inspection. Our Maben office coordinates with your builder on scheduling, material delivery, and inspection timing. Typical install time is 1-3 days depending on size and complexity.
Get a Free Quote →
Metal Roofing
Metal roofing works on pitches as low as 3:12 for standing seam and as low as 1:12 with specific underlayment and sealant requirements. Steep pitches look incredible in metal. We help you choose the right panel profile, material, and color for your Maben home.
Get a Free Quote →
Shingle Roofing
We install every major shingle brand: GAF Timberline HDZ, Owens Corning Duration, CertainTeed Landmark, Atlas Pinnacle, Tamko Heritage, Malarkey Vista, and IKO Cambridge. Each brand has different warranty tiers, wind ratings, and price points. We help you compare without pushing one brand over another.
Get a Free Quote →
Flat Roofing
Flat roofs don't actually drain themselves. That's the challenge. Water ponds, UV breaks down the membrane, and eventually it leaks. We install and repair TPO, PVC, EPDM, modified bitumen, and built-up roofing systems designed for zero-slope conditions in Maben.
Get a Free Quote →
Commercial Roofing
Your commercial roof has HVAC units, exhaust fans, plumbing vents, and satellite dishes punching through it. Every penetration is a potential leak point. We install prefabricated curbs, custom-welded flashings, and pitch pans that handle foot traffic and thermal cycling without failing.
Get a Free Quote →
Gutter Installation
We custom-form seamless aluminum gutters on-site from a continuous coil of .027 gauge stock. No factory seams means no seam failures. We form them to the exact length your fascia requires. One piece, one gutter, no leaks.
Get a Free Quote →
Roof Inspection
After a storm, our inspection documents hail hits, wind damage, lifted shingles, and cracked components for your insurance claim. We take measurements, count damage per test square, and prepare a report your adjuster can use. Free for Maben homeowners. We only charge if you hire us for the repair.
Get a Free Quote →
Emergency Roof Repair
Emergency protocol for active water intrusion: (1) interior containment. Buckets, plastic sheeting, water extraction if accessible, (2) exterior tarping with 20x30 heavy-duty poly sheeting over damaged area extending minimum 4 feet past damage on all sides, (3) secure with 2x4 nailer boards lag-screwed to the roof deck (not through shingles), (4) secondary tarp overlap for multi-section damage, (5) document with timestamped photos for insurance. Permanent repair scheduled within 48-72 hours once materials are sourced.
Get a Free Quote →
Skylight Installation
VELUX FS (fixed) and VS (vented) skylights installed with EDL flashing kits for shingle roofs. The multi-step flashing integrates with the surrounding shingle courses per IRC R903.2. We frame the curb with doubled 2x8 or 2x10 lumber (depending on rafter depth), install ice and water shield membrane around the entire curb perimeter, then set the skylight with factory sealant before weaving step flashing into the field. Top headwall flashing tucks under the upslope shingle course. Bottom sill pan diverts water onto the downslope shingles. Zero exposed sealant joints. Mechanical flashing only.
Get a Free Quote →